TERAND INDUSTRIES INC -- INVISIBLE SKIN PROTECTOR  -- 6810-00N025686
<pre>=====================  Product Identification  =====================

Product ID:INVISIBLE SKIN PROTECTOR
MSDS Date:11/14/1988
FSC:6810
NIIN:00N025686
=== Responsible Party ===
Company Name:TERAND INDUSTRIES INC
Box:9947
City:FT LAUDERDALE
State:FL
ZIP:33310
Country:US
Info Phone Num:305-974-5440
Emergency Phone Num:305-974-5440
CAGE:OO296
=== Contractor Identification ===
Company Name:TERAND INDUSTRIES, INC.
Box:9947
City:FT. LAUNDERDALE
State:FL
ZIP:33310
Phone:305-974-5440
CAGE:OO296

=============  Composition/Information on Ingredients  =============

Ingred Name:STEARIC ACID
CAS:57-11-4
RTECS #:WI2800000

Ingred Name:1,2-PROPANEDIOL; (PROPYLENE GLYCOL)
CAS:57-55-6
RTECS #:TY2000000

Ingred Name:GLUCITOL; (SORBITOL)
CAS:50-70-4
RTECS #:LZ4290000

Ingred Name:POLYDIMETHYL SILOXANE; (DIMETHYLPOLYSILOXANE) (MFR'S CAS #
    63148-62-9)
CAS:9016-00-6
RTECS #:TQ2690000

Ingred Name:TETRADECANOIC ACID, ISOPROPYL ESTERL (ISOPROPYL MYRISTATE)
CAS:110-27-0
RTECS #:XB8600000

Ingred Name:ETHANOL, 2,2',2"-NITRILOTRI-; (TRIETHANOLAMINE)
CAS:102-71-6
RTECS #:KL9275000

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHAL:PROD EXISTS AS A FOAM. NO
    HARMFUL EFFECTS KNOWN FROM AVAILABLE INFORMATION. SKIN:NO EVIDENCE
    OF ADVERSE EFFECTS FROM AVAILABLE INFORMATION. INGEST:CAN CAUSE GI
    IRRITATION, NAUSEA, VOMITING AND D IARRHEA. ASPIRATION OF MATERIAL
    INTO LUNGS CAN CAUSE CHEM PNEUMONITIS. EYES:CAN CAUSE IRRITATION,
    (EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:REDNESS, TEARING AND BLURRED VISION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN:FLUSH WITH SOAP AND WATER. EYES:FLUSH WITH WATER FOR AT
    LEAST 15 MINUTES, LIFTING UPPER AND LOWER LIDS. INHAL:UNLIKELY
    ROUTE OF EXPOSURE. TREAT FOR STRANGULATION. INGEST:DILUTE WITH
    WATER. DO NOT  INDUCE VOMITING. GET MD ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:NON-FLAMM (MFR)
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:KEEP CONTRS COOL. USE NIOSH/MSHA APPRVD EQUIP
    REQ TO PROTECT PERSONEL AGAINST BURSTING/RUPTURING/VENT CONTRS. USE
    NIOSH/MSHA APPRVD SCBA/FULL PROT EQUIP .
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES (ABOVE 120F)
    CONTAINERS MAY VENT RUPTURE OR BURST.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP AREA BY MOPPING OR WITH ABSORBENT
    MATERIAL AND PLACE IN CLOSED CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE AT TEMPERATURES ABOVE
    120F.
Other Precautions:PLEASE READ AND FOLLOW DIRECTIONS ON PRODUCT LABEL.
    THEY ARE YOUR GUIDE TO USING PRODUCT IN MOST EFFECTIVE WAY, AND
    THEY ALSO GIVE NECESSARY SAFETY PRECAUTIONS TO PROTECT YOUR HEALTH.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:UNDER NORMAL CONDITIONS, NO RESPIRATORY
    PROTECTION IS REQUIRED. USE NIOSH/MSHA APPROVED RESPIRATOR
    APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NORMAL VENTILATION IS ADEQUATE.
Protective Gloves:NONE REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Vapor Pres:64
Spec Gravity:0.983 (H*2O=1)
Solubility in Water:COMPLETE
Appearance and Odor:WHITE FOAM WITH PERFUME ODOR.
Percent Volatiles by Volume:95

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND STRONG ACIDS.
Stability Condition to Avoid:DO NOT EXPOSE TO TEMPERATURES ABOVE 120F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN PRESENCE OF
    AIR MAY YIELD CO AND/OR CO*2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WHEN USED PROPERLY, AEROSOL PROD DO NOT GENERATE
    HAZ WASTE, EMPTY DE-PRESS CONTRS CAN NOT BE REUSED & SHOULD BE
    WRAPPED AND PUT IN A PERMITTED WASTE MANAGEMENT FACILITY. CONSULT
    FEDERAL, STATE & LOCAL  AUTHORITIES FOR APPRVD PROCEDURES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.