BENJAMIN MOORE & CO -- ENHANCE VINYL LATEX FLAT, 222-3A  -- 8010-00N016190
<pre>=====================  Product Identification  =====================

Product ID:ENHANCE VINYL LATEX FLAT, 222-3A
MSDS Date:11/30/1988
FSC:8010
NIIN:00N016190
=== Responsible Party ===
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Info Phone Num:201-344-1200
Emergency Phone Num:201-344-1200
CAGE:09585
=== Contractor Identification ===
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:09585
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
Box:City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:91950

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYLENE GLYCOL  (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 2.3-2.5%
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: IRRITATION OF THE
    RESPIRATORY TRACT. SKIN/EYE: PRIMARY IRRITATION. INGEST: COULD
    CAUSE SERIOUS INJURY. CHRONIC: NONE KNOWN.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE TO FRESH AIR. GET MEDICAL HELP FOR ANY
    BREATHING DIFFICULTY. EYE: FLUSH THOROUGHLY WITH WATER FOR AT LEAST
    15 MIN. CALL PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. INGEST:
    DRINK 1 OR 2 GL ASSES OF WATER TO DILUTE. DO NOT INDUCEVOMITING.
    CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>250F,>121C
Extinguishing Media:USE EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING
    FIRE .
Fire Fighting Procedures:COOL EXPOSED CONTAINERS WITH WATER.  USE
    NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST IF EXPOSED TO
    EXTREME HEAT OR FIRE. TOXIC GASES MAY FORM WHEN PRODUCT BURNS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH WITH WATER. ABSORB WITH SAWDUST OR RAGS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT THROW OR DROP CONTAINERS.
Other Precautions:AVOID CONTACT WITH EYES AND PROLONGED CONTACT WITH
    SKIN OR BREATHING OF SPRAY MIST OR SANDING DUST. CLOSE CONTAINER
    AFTER EACH USE. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE
    INTERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR SPECIFIED FOR
    PROTECTION AGAINST PAINT SPRAY MIST AND SANDING DUST IN RESTRICTED
    OR CONFINED AREAS.
Ventilation:ADEQUATE TO MAINTAIN WORKING ATMOSPHERE BELOW TLV AND LEL.
    MECHANICAL EXHAUST MAY BE REQUIRED IN CONFINED AREAS.
Protective Gloves:WATERPROOF DURING REPEATED CONTACT.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLOTHING ADEQUATE TO PROTECT SKIN.
Work Hygienic Practices:REMOVE AND WASH CLOTHING BEFORE REUSE. WASH
    HANDS BEFORE EATING OR USING THE WASHROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Vapor Density:HVR/AIR
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:62-68

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON DIOXIDE AND
    CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONVENTIONAL PROCEDURES IN COMPLIANCE WITH
    LOCAL, STATE AND FEDERAL REGULATIONS. DO NOT INCINERATE SEALED
    CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.